List of Tool Room / Tool Design Centres
Central Tool Room & Training Centre (CTTC), CalcuttaIntroductionCentral Tool Room & Training Centre (CTTC), Calcutta has been set up in the year 1977-78 by MSME-DO to meet the growing need of toolings in India and to assist SSI units. This Tool Room has been set up with the assistance of Government of Denmark and the land has been provided by the State Government of West Bengal. The total investment in the Tool Room is over Rs 20.00 crores. Objectives of the Tool Room (i) To assist SSI units in technological upgradation by providing quality toolings. (ii) To increase efficiency of SSI units by providing consultancy and common service facilities in the areas of design and production of tools, jigs and fixtures, moulds & dies etc. (iii) To design and manufacture precision tools such as Press Tools, mould and dies for metal castings, jigs and fixtures and special purpose tools. (iv) To conduct long term training courses in tool and die making, machining and fitting and short term courses on related subjects to personnel working in the industries. Management The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India. DC (SSI) is the President of this Society and Chairman of their Governing Council. Adequate representation to State Government, donor country and Industry Associations has been provided in the constitution of Governing Council. Specific capabilities The Tool Room is equipped with latest state of the art imported and indigenous machinery and equipment and is providing comprehensive and integrated services in Tool Engineering. It has high-tech capabilities in tool production, tool design and heat treatment besides providing consultancy services in the field of tool engineering and innovation for improved quality and productivity. The CTTC is focused towards the growth of Indian industries and is thus committed to undertaking product design and prototype development. The consistent high quality and precision orientation has been the main strength to the general engineering industry whether it requires quality moulds, dies and tools or precision components. Some of the high-tech machines installed at the Tool Room are CNC 5 Axis Machining Centre, Rapid Prototyping Equipment, CNC Lathe, CNC Milling Machines, CNC Jig Boring Machine, CNC EDM Machines, CNC Wire Cut Machine, CNC Coordinate Measuring Machine, Computer Aided Design Section and Vacuum Heat Treatment Furnace etc. Sophisticated Management Information System including Computers, Networking & Peripherals has also been installed in the Centre for its better functioning. Training facilities and service available CTTC, Calcutta is equipped for comprehensive and integrated service in Tool Engineering, state of the art leading edge technology in CNC, CAD/CAM, Precision Engineering, modern teaching aids, technological support & consultancy where mission is high degree precision & quality and steadily updating design & development which will excel at every level. Well structured, modular, practically oriented 4 year Diploma training programme in Tool & Die Making with intake capacity of 40 is another focus area of CTTC. This Course in Tool & Die Making is approved by AICTE, Government of India and recognised by State Council for Engineering and Technical Education, West Bengal as equivalent to Diploma in Mechnical Engineering for job purposes. It has also been recognised by Government of Rajasthan, Technical Education Department for employment to the posts under the State Government where Diploma in Mechanical Engineering in the field of Tool & Die Making is the prescribed qualification. Institution of Engineers (India) has recognised this course as exempting from studentship examination. The target group for this training programme is candidates who have passed Matriculation or equivalent examination from a recognised University or Board with Mathematics and Science (Physics or Chemistry or both) with minimum 50% marks (40% in case of candidates belonging to SC/ST in aggregate). Commencement period and fee for 4 Year Diploma Course Session for 4 Years Diploma in Tool and Die Making Course commence in September/October every year. Details of admission dates are published in newspapers and the selection of candidates is made on the basis of merit through written test. Prospectus can be had from the Tool Room. Fee for this Course is Rs.9000/- p.a. Fee structure is subject to change and terms and conditions apply. The intake of candidates p.a. is 48. Accommodation available for trainees Hostel facilities are available for 98 participants. Short Term Training Courses Having realised the need to update the skills of the technical personnel in the industry, CTTC has launched numerous short-term courses - both regular and tailor made ones - to meet the specific needs of the industry. All these courses are regularly upgraded to keep abreast of the global technological advancements. The equipment installed in the Training Centre range from the conventional to the state of the art. In close consultation with the industry, the CTTC shall continue the thrust to develop specific tailor-made courses. Some of the short-term training courses being conducted by the Tool Room are as follows:-
Note:
Address Central Tool Room & Training Centre, Bon Hoogly Industrial Area, Contact person Name and Designation : Shri Shujayat Khan, General Manager (Phone & Fax Nos. as given above).
Central Tool Room & Training Centre (CTTC), BhubaneshwarIntroduction Central Tool Room & Training Centre (CTTC), Bhubaneshwar has been set up by MSME-DO to meet the growing need of toolings in India and to assist SSI units. This Tool Room has been set up in the year 1991 with the assistance of Government of Denmark and the land/building and infrastructure facilities have been provided by the State Government of Orissa. The total investment in the Tool Room is around Rs 52.00 crores. Objective of the Tool Room (i) To assist SSI units in technological upgradation by providing quality toolings. (ii) To increase efficiency of SSI units by providing consultancy and common service facilities in the areas of design and production of tools, jigs and fixtures, moulds & dies etc. (iii) To design and manufacture precision tools such as Press Tools. moulds and dies for metal castings, jigs and fixtures and special purpose tools. (iv) To conduct long term training courses in tool and die making, machining and fittting and short term courses on related subjects to personnel working in the industries. Management The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India. DC (SSI) is the President of this Society and Chariman of their Governing Council. Adequate representation to State Government, donor country and Industry Association has been provided in the constitution of Governing Council. Specific capabilities The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India. DC(SSI) is the President of this Society and Chairman of their Governing Council. Adequate representation to State Government, donor country and Industry Associations has been provided in the constitution of Governing Council. Specific capalibities of Tool Room The Tool Room is equipped with latest state of the art imported and indigenous machinery and equipment and is providing comprehensive and integrated services in Tool Engineering. It has high-tech capabilities in tool production, tool design and heat treatment besides providing consultancy services in the field of tool engineering and innovation for improved quality and productivity. The CTTC has focused towards the growth of Indian industries and is thus committed to undertaking product design and prototype development. The consistent high quality and precision orientation has been the main strength to the general engineering industry whether it requires quality moulds, dies and tools or precision components. Some of the high-tech machines installed at the Tool Room are Agiecut CNC Wire EDM, CNC Jig Grinder, Agietron CNC EDM, Mikron CNC High Speed Milling (for electrode making), Studer Precision Cyl. Grinding Machine, Schaublin High Precision Turning, Mazak CNC Turning Lathe, CNC Docket Machining Centre, Jungner Tool & Cutter Grinder, Jakobsen Grinding Machine, ZEISS CNC 3D Coordinate Measuring Machine, ALD Vacuum Heat Treatment Furnace and Demag Injection Moulding Machine (Micro Processor Controlled), CAD/CAM Equipment with Silicon Graphic Work Stations, Hydraulic Press, etc. Training facilities and services available CTTC, Bhubaneshwar is equipped for comprehensive and integrated service in Tool Engineering, state of the art leading edge technology in CNC, CAD/CAM, Precision Engineering, Robotics and beyond, modern teaching aids, technological support and consultancy where mission is high degree precision and quality and steadily updating design and development which will excel at every level. Well structured, modular, practically oriented 4 year diploma in Tool and Die making training programmes with intake capacity of 48 is another focus area of CTTC. This course has been approved by AICTE, Government of India and recognised by State Technical Board, Orissa as equivalent to Diploma in Mechnical Engineering awarded by State Techincal Council of Orissa.This course has also been recognised by Institute of Engineers (India), Calcutta and the passed out candidates are exempted from studentship examination. The target group for this training programme is candidates, who have passed HSC/SSC or equivalent examination from a recognised University or Board with Mathematics and Science (Physics or Chemistry or both) with minimum 50% marks (40% in case of candidates belonging to SC/ST in aggregate). Commencement period and fee for 4 Year Diploma Course Session for 4 Years Diploma in Tool and Die Making Course commence in September/October every year. Details of admission dates are published in newspapers and the selection of candidates is made on the basis of merit through written test. Prospectus can be had from the Tool Room. Fee for this Course is Rs.9000/- p.a. Fee structure is subject to change and terms and conditions apply. The intake of candidates is 60 p.a. Short Term Training Courses Having realised the need to update the skills of the technical personnel in the industry, CTTC has launched numerous short-term courses - both regular and tailor made ones - to meet the specific needs of the industry. All these courses are regularly upgraded to keep abreast of the global technological advancements. The equipment installed in the Training Centre range from the conventional to the state of the art. In close consultaion with the industry, the CTTC shall continue the thrust to develop specific tailor-made courses. Some of the short-term training courses being conducted by the Tool Room are as follows:-
Note:
Accommodation available for Trainees For trainees of long term Diploma courses, hostel facility is provided. Limited hostel facilities are available for participants of short-term training courses. Address: Central Tool Room & Training Centre, Contact person Name and Designation : Shri Anil Bhandari, General Manager (Phone and fax nos as given above)
Indo Danish Tool Room (IDTR), JamshedpurIntroduction Indo Danish Tool Room, formerly known as Central Tool Room & Training Centre, Jamshedpur, has been set up by MSME-DO to meet the growing need of toolings in India and to assist SSI units. This Tool Room has been set up in the year 1991 with the assistance of Government of Denmark and the infrastructure facilities have been provided by the State Government of Bihar. The total investment in the Tool Room is around Rs 52.00 crores. Objectives of the Tool Room (i) To assist SSI units in technological upgradation by providing quality toolings. (ii) To increase efficiency of SSI units by providing consultancy and common service facilities in the areas of design and production of tools, jigs and fixtures, moulds & dies etc. (iii) To design and manufacture precision tools such as Press Tools, moulds and dies for metal castings, jigs and fixtures and special purpose tools. (iv) To conduct long term training courses in tool and die making, machining and fitting and short term courses on related subjects to personnel working in the industries. Management The management of affairs of the Tool Room which has been set up as Government of India Society rests with the Governing Council constituted by Government of India. DC(SSI) is the President of this Society and Chairman of their Governing Council. Adequate representation to State Government, donor country and industry associations has been provided in the constitution of governing council. Specific capabilities of Tool Room The Tool Room is equipped with latest state of the art machinery and equipment and is providing comprehensive and integrated services in Tool Engineering. It has high-tech capabilities in tool production, tool design and heat treatment besides providing consultancy services in the field of tool engineering and innovation for improved quality and productivity. The IDTR has focused towards the growth of Indian industries and is thus committed to undertaking product design and prototype development. The consistent high quality and precision orientaion has been the main strength to the general engineering industry whether it requires quality moulds, dies and tools or precision components. Some of the high-tech machines installed at the Tool Room are Agiecut CNC Wire EDM, CNC Jig Grinder, Agietron CNC EDM, Mikron CNC High Speed Milling (for electrode making), Studer Precision Cyl. Grinding Machine, Schaublin High Precision Turning, Mazak CNC Turning Lathe, CNC Docket Machining Centre, Jungner Tool & Cutter Grinder, Jakobsen Grinding Machine, ZEISS CNC 3D Coordinate Measuring Machine, ALD Vacuum Heat Treatment Furnace and Demang Injection Moulding Machine (Micro Processor Controlled), CAD/CAM Equipment with Silicon Graphic Work Stations, Hydraulic Press, etc. Training facilities and service available IDTR, Jamshedpur is equipped for comprehensive and integrated service in Tool Engineering, state of the art leading edge technology in CNC, CAD/CAM, Precision Engineering, modern teaching aids, technological support & consultancy where mission is high degree precision & quality and steadily updating design & development which will excel at every level. Well structured, modular, practically oriented 4 years Diploma in Tool & Die making training programmes with intake capacity of 40 are another focus area of IDTR. This course has been approved by AICTE, Govt. of India, recognised by State Board of Technical Education. This course has also been recognised by Institute of Engineers (India), and the passed out candidates are exempted from Studentship Examination of the institution. The target group for this training programme is candidates who have passed HSC/SSC or equivalent examination from a recognised University or Board with Mathematics and Science (Physics or Chemistry or both) with minimum 50% marks (40% in case of candidate belonging to SC/ST in aggregate). Commencement period & fee for 4 Year Diploma Course Session for 4 Year Diploma in Tool and Die Making Course commence in September/October every year. Details of admission dates are published in newspapers and the selection of candidate is made on the basis of merit through written test. Prospectus can be had from the Tool Room. Fee for this course is Rs 9000/- per annum. Fee structure is subject to change and terms and conditions apply. The intake of candidates p.a. is 48. Short Term Training Courses Having realised the need to update the skills of the technical personnel in the industry, IDTR has launched numerous short-term courses - both regular and tailor made ones - to meet the specific needs of the industry. All these courses are regularly upgraded to keep abreast of the global technological advancements. The equipment installed in the Training Centre range from the conventional to the state of the art. In close consultation with the industry, IDTR shall continue the thrust to develop specific tailor-made courses. Some of the short-term training courses being conducted by the Tool Room are as follows:-
Note:-
Accommodation available for Trainees Limited hostel facilities are available for participants of short-term training courses. Additional hostel facilities would be available shortly. Address: Indo Danish Tool Room Contact Person Name and designation: Shri S. Kasi, General Manager (Phone and fax No. as given above) |
