| |
Annexure 11 |
| List of Machinery
for Engineering Colleges for the District Vizianagaram, Andhra Pradesh |
| GOKUL P G COLLEGE FOR MCA & MBA |
Computer, Printer, CD Writer, Scanner, Web Cam, Hub,
UPS |
| JNTUK UNIVERSITY COLLEGE OF
ENGINEERING,VIZIANAGARAM |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| |
|
| List of Machinery
for Polytechnics for the District Vizianagaram, Andhra Pradesh |
| AVANTHI POLYTECHNIC COLLEGE |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| BALAJEE POLYTECHNIC |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| BHASKARA POLYTECHNIC |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| GOVERNMENT POLYTECHNIC, PARVATHIPURAM. |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| |
|
| List of Machinery
for ITI Colleges for the District Vizianagaram, Andhra Pradesh |
| Govt Industrial Training Institute, Bobbili |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Surya Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Shri Sanjay Gandhi Memorial Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Manaas Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Viswabharathi Industrail Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Srinivasa Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Ekashila
Industrial Training Centre, Janagaon |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Venus
Industrial Training Centre, Dankal |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Fatima
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Govt
Industrial Training Institute |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Laurel
Industrial Training Centre, Hanamkonda |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Govt. Residential Industrial Training Institute for Tribals,
Eturnagaram |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Gawtham ITC
(Shifting From Dist Krishna) |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Suhana
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Vidhyarthi
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
|
|