| |
Annexure 1 |
| List of Machinery
for Engineering Colleges for the District Anantpur, Andhra Pradesh |
| ANANTHA LAKSHMI INSTITUTE OF TECHNOLOGY
& SCIENCES |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| BIT INSTITUTE OF TECHNOLOGY |
CISCO
Networking Lab, Cyber/Network Security Lab, MATLAB, Scilab, Multimedia
Packages, .NET, Android Programming, Compilers, Java, C++, Android
Developemnet Kit and Multimedia Software etc.Lathe Machine
Milling Machine
Grinding Machine
Shaper
Sawing Machine
Tool and Cutter Grinder
Surface Grinder
Experimental Kits
Dynamometer-Lathe / Drill / Milling
TIG / MIG Welding Set
Electro Discharge Machine
Ultrasonic Drilling Machine,Experimental Refrigeration Plant (6 TON)
Refrigerator
Refrigeration & Air Conditioning Test Equipment
Working Models of AC, Refrigerator and Water Cooler
Cut Models of components of AC |
| CHIRANJEEVI REDDY INSTITUTE OF ENGINEERING
AND TECHNOLOGY |
CISCO
Networking Lab, Cyber/Network Security Lab, MATLAB, Scilab, Multimedia
Packages, .NET, Android Programming, Compilers, Java, C++, Android
Developemnet Kit and Multimedia Software etc.Lathe Machine
Milling Machine
Grinding Machine
Shaper
Sawing Machine
Tool and Cutter Grinder
Surface Grinder
Experimental Kits
Dynamometer-Lathe / Drill / Milling
TIG / MIG Welding Set
Electro Discharge Machine
Ultrasonic Drilling Machine,Experimental Refrigeration Plant (6 TON)
Refrigerator
Refrigeration & Air Conditioning Test Equipment
Working Models of AC, Refrigerator and Water Cooler
Cut Models of components of AC |
| |
|
| List of Machinery
for Polytechnics for the District Anantpur, Andhra Pradesh |
| GOVERNMENT POLYTECHNIC, RAYADURG |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| GOVERNMENT POLYTECHNIC, URAVAKONDA |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| |
|
| List of Machinery
for ITIs for the District Anantpur, Andhra Pradesh |
| Govt.
Industrial Training Institute |
Lathe
SS&SC 15cmcentre height 120cm centre distance, Lathe SS&SC 20cmcentre
height 120cm centre distance ,Grinding M/c Pedestal type DE 250mm Dia.wheel ,
Drill M/c Pillar type 12mm , Power Saw M/c 400mm, .Shaping M/c 450mm ,
Slotter 180mm stroke, Lathe General purpose 150mm centre distance, Tool &
Cutter Grinder 250mm , Drilling M/c Pillar 20mm , Radial Drilling M/c1200mm ,
Silicon Carbide Grinder , Milling M/c Universal Horizontal No.1 9. Milling
M/c Universal Horizontal No.0 10. Milling M/c Plain type Horizontal No.2 11.
Milling M/c Vertical No.1, Drilling M/c Pillar type 0-20mm , Drilling M/c Bench sensitive 0-12mm , Forge
Portable hand blower 38 to 45 cm, Evacuating & Refrigewrant Charging Station, Refrigerator,Compression type 165
litre, Refrigerator,Comp. type 300
litre double door , Window A/C3000 Kcal/hr , Bottle Cooler 110 litre , Water
Cooler Storage , Ice Candy Unit , Cold Storage Plant , Condensing Unit 3000
Kcal/hr, Refrigerator 170 Litre using
134 refrigerant, No Frost Refrigerator
300 Litre , Visi Cooler, Drawing Board(700x500mm), Universal Drafting
M/c(1500x1000mm) , PC-AT for Auto CAD with Plotter & Dot Matrix Printer,
Ammonia Printing M/c , Drawing Tables, Drafting Machine, Pentograph-brass , Draughtsman Table,
C.R.O., Record Player, Tape Recorder & Stereo Type, T.V.Trainer , Transistor Tester, I.C.Tester , V.C.P. 8.V.C.R., Micro Processor Training Kit, Electric
Drill M/c Portable 6mm 2.Pillar Electric Drill Machine 12 mm , Bench Grinder
, Motor Generator Induction Squirrel Cage Set7 HP,400V,3 Phase, Motor Generator Set Motor Shunt 5
HP,440V,3 Phase, Motor Shunt DC
220V,0.5 to 2 HP, Motor AC wound slip
ring type 5 HP , Motor AC single phase 1 HP repulsion type , Motor AC single
phase 1 HP series type , Motor AC
single phase 1 HP capacitor type,
Motor Universal 1HP , Transformer
single phase3KVA air cooled , Transformer 3 phase5 KVA oil cooled, Current Transformer , Potential Transformer
, D.C. Shunt Generator 2.5 KW, Diesel
Generator 5 KVA, Wheel Alignment Gauge ,
Motor Car(Petrol) , Petrol Engine 4.Diesel Engine , Petrol Engine(2-s)
6.Air Compressor 2stage-500 litres 5HP,
Exhaust Gas Analyser, Smoke
Tester, Wheel type Tractor with diesel engine 2.9 line cultivator 3 furrow
disc plough with scrapers, TransformerWelding 300A/400A , Arc Welding st
rectifier type 300-450A , Welding Generator DC rotary set 200-300A 4.CO2
Welding Machine , TIG Welding Set 300 A
(AC/DC) , Spot Welding Machine , Plasma Arc Cutting Machine , Welding
Transformer Single Phase, Cutter,Pipe wheel type 6mm to 25mm , Pipe Vice 77mm
,Stilson Pipe Wrench , Pipe Bender Manually operated, Gun Spray complete,
Twin lens Reflex Camera , Single lens Reflex Camera, Typewriter(16”
Carriage), Personal Computer, Fax M/c
4.Photocopying M/c , Tape Recorder,
Dot Matrix Printer , Over head Projector(OHP), Treadle Machine, Lock Stitch drop
feed, Over locking M/c twin needle 3-5
thread, Treadle M/c Motorised 1/8 HP
4.Fashion Maker M/c. |
| National
Industrial Training Centre |
Welding
Sets, Computers, Lathe, Sewing Machines, etc |
| Govt Industrial Training Institute for Women |
Lathe
SS&SC 15cmcentre height 120cm centre distance, Lathe SS&SC 20cmcentre
height 120cm centre distance ,Grinding M/c Pedestal type DE 250mm Dia.wheel ,
Drill M/c Pillar type 12mm , Power Saw M/c 400mm, .Shaping M/c 450mm ,
Slotter 180mm stroke, Lathe General purpose 150mm centre distance, Tool &
Cutter Grinder 250mm , Drilling M/c Pillar 20mm , Radial Drilling M/c1200mm ,
Silicon Carbide Grinder , Milling M/c Universal Horizontal No.1 9. Milling
M/c Universal Horizontal No.0 10. Milling M/c Plain type Horizontal No.2 11.
Milling M/c Vertical No.1, Drilling M/c Pillar type 0-20mm , Drilling M/c Bench sensitive 0-12mm , Forge
Portable hand blower 38 to 45 cm, Evacuating & Refrigewrant Charging Station, Refrigerator,Compression type 165
litre, Refrigerator,Comp. type 300
litre double door , Window A/C3000 Kcal/hr , Bottle Cooler 110 litre , Water
Cooler Storage , Ice Candy Unit , Cold Storage Plant , Condensing Unit 3000
Kcal/hr, Refrigerator 170 Litre using
134 refrigerant, No Frost Refrigerator
300 Litre , Visi Cooler, Drawing Board(700x500mm), Universal Drafting
M/c(1500x1000mm) , PC-AT for Auto CAD with Plotter & Dot Matrix Printer,
Ammonia Printing M/c , Drawing Tables, Drafting Machine, Pentograph-brass , Draughtsman Table,
C.R.O., Record Player, Tape Recorder & Stereo Type, T.V.Trainer , Transistor Tester, I.C.Tester , V.C.P. 8.V.C.R., Micro Processor Training Kit, Electric
Drill M/c Portable 6mm 2.Pillar Electric Drill Machine 12 mm , Bench Grinder
, Motor Generator Induction Squirrel Cage Set7 HP,400V,3 Phase, Motor Generator Set Motor Shunt 5
HP,440V,3 Phase, Motor Shunt DC
220V,0.5 to 2 HP, Motor AC wound slip
ring type 5 HP , Motor AC single phase 1 HP repulsion type , Motor AC single
phase 1 HP series type , Motor AC
single phase 1 HP capacitor type,
Motor Universal 1HP , Transformer
single phase3KVA air cooled , Transformer 3 phase5 KVA oil cooled, Current Transformer , Potential Transformer
, D.C. Shunt Generator 2.5 KW, Diesel
Generator 5 KVA, Wheel Alignment Gauge ,
Motor Car(Petrol) , Petrol Engine 4.Diesel Engine , Petrol Engine(2-s)
6.Air Compressor 2stage-500 litres 5HP,
Exhaust Gas Analyser, Smoke
Tester, Wheel type Tractor with diesel engine 2.9 line cultivator 3 furrow
disc plough with scrapers, TransformerWelding 300A/400A , Arc Welding st
rectifier type 300-450A , Welding Generator DC rotary set 200-300A 4.CO2
Welding Machine , TIG Welding Set 300 A
(AC/DC) , Spot Welding Machine , Plasma Arc Cutting Machine , Welding
Transformer Single Phase, Cutter,Pipe wheel type 6mm to 25mm , Pipe Vice 77mm
,Stilson Pipe Wrench , Pipe Bender Manually operated, Gun Spray complete,
Twin lens Reflex Camera , Single lens Reflex Camera, Typewriter(16”
Carriage), Personal Computer, Fax M/c
4.Photocopying M/c , Tape Recorder,
Dot Matrix Printer , Over head Projector(OHP), Treadle Machine, Lock Stitch drop
feed, Over locking M/c twin needle 3-5
thread, Treadle M/c Motorised 1/8 HP
4.Fashion Maker M/c. |
| Sri Venkateswara Industrial Training Institute |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Rajaji
Industrial Training Centre |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Republic
Industrial Training Centre |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Sri Maharishi
Industrial Training Centre |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Sri Sarvodaya
Industrial Training Centre |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Srinivasa
Industrial Training Centre |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Sri Venkateswara Rajamata Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Sri Venkateswara Industrial Training Centre, Guntakal |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Sri Venkateswara Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Bharath
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Mahalakshmi
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| MAHALAKSHMI
ITC |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| New Tech
Industrial Training centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Patti Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Ramakrishna
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| SRI SAIRAM
Industrial Training Centre |
SS
and SC centre lathe (all geared) with minimum specification as: Centre height
150 mm and centre distance 1000 mm along with 3 & 4 jaw chucks, auto feed
system, safety guard, taper turning attachment, motorized coolant system,
lighting arrangement & standard accessories, Drilling machine pillar
sensitive 0-20 mm cap with swivel table motorised with chuck & key., D.E.
pedestal Grinding machine with 200mm diameter wheels rough and smooth with
twist drill grinding attachment., Forge portable hand blower 38 cm to 45 cm.,
Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key,
Depth micrometer 0-25 mm. 0.01 mm, Vernier caliper 0-150 mm. L.C. 0.02 mm,
Adjustable spanner 38 cm long/ Hand Drill
Machine, Portable Electric Drill Machine 6 mm capacity, Pillar
Electric Drill Machine 12 mm capacity, Thermometer 0 to 100 deg Centigrade ,
Soldering Iron 25 watt, 65 watt, 125 watt, Ohm Meter; Series Type & Shunt
Type, Digital Multi Meter, A.C. Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A,
0- 25 A, A.C. Energy Meter, Single phase 5 amp. Three Phase 15 amp, Flux
meter, DC Power Supply 0-30V, 2 amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5
Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1 Amp, 1 Phase Variable Auto Transformer,
Battery Charger, Hydromete |
| Sri Sai
Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Venkata
Sai Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri
Venkateswara Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Bharat
Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Ibrahimpatnam
Industrial Training Centre, Madigubba |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Sai Venkateshwara Industrial Training Centre,
Chennakottapally |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Angelo
Industrial Training Centre, Hindupur |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Venkateswara
Industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Sai Venkateswara Industrial Training Centre, Gooty Road |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Ram
industrial Training Centre |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Srinivasa
Industrial Training Centre Hindupur |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Sri Venkatasai
ITC |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Govt. ITI,
Hindupur |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Govt. ITI,
Tadpatri |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Mahalakshmi
ITC |
CAD
laboratory, creep testing, fatigue testing, torsion testing, Hardness testing
machines, fluid machinery like turbines, pumps and other hydraulic equipment,
Refrigeration Test Rig, Water Cooler, Simple Vapour Compression System,
Domestic Refrigerator, Ice Plant, Vapour Absorption Refrigeration System,
Blower Test Rig, Air Conditioner and Cut Sections of different components,
ATLAB(SIMULINK)/ COMSIM software for digital link simulation, for error
introduction & error estimation in digital link, nterfacing cards like
ADC, DAC ,dc motor,Trafic light Control,Stepper motors kits of various
interfacing devices like 8255(PPI), 8259(Interrupt Controller),8279(keyboard
controller) & 8237 (DMA Controller) |
| Govt. ITI,
Guntakal |
|
| National Pvt
ITI |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Govt. ITI,
Uravakonda-(M), |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
| Sri Venkata
Sai Private ITI |
Hand
Drill Machine, Portable Electric Drill
Machine 6 mm capacity, Pillar Electric Drill Machine 12 mm capacity,
Thermometer 0 to 100 deg Centigrade , Soldering Iron 25 watt, 65 watt, 125
watt, Ohm Meter; Series Type & Shunt Type, Digital Multi Meter, A.C.
Voltmeter M.I. 0 –500V A.C, Ammeter MC 0-5 A, 0- 25 A, A.C. Energy Meter,
Single phase 5 amp. Three Phase 15 amp, Flux meter, DC Power Supply 0-30V, 2
amp, Rheostat 0 -1 Ohm, 5 Amp 0 -10 Ohm, 5 Amp 0- 25 Ohm, 1 Amp 0- 300 Ohm, 1
Amp, 1 Phase Variable Auto Transformer, Battery Charger, Hydromete |
|
|